Since the most cheap tubes are not sufficient repairable anymore, too must plastic, the time it takes to do and the status of most tubes, this is someting that is marked as: "Do It Yourself".

Our standard tube is CST in the size 28x1.5/8x1.3/8 with 40mm Dunlop Valve.
French valve is €1,50 extra
Other sizes, brands (Schwalbe or Continental) and valve types are available at different price.
The stated price is front wheel mounting.
Rear wheel mounting is €5,00 extra.

Motor wheel mounting is €15,00 extra.

Our standard tyre is the CST Sensamo Xpedium One; with Anti Puncture Protection 1 and the size 28x1.5/8x1.3/8 or 37-622
Other brands (Schwalbe or Continental) and sizes are available at different price.
The stated price is front wheel mounting.

Rear wheel mounting is €5,00 extra.

Motor wheel mounting is €8,50 extra.

The combination of the tyre and the tube is composed from the above items.
The price for this combination is for simultaneous mounting on the front wheel.
The stated price is front wheel mounting.
Rear wheel mounting is €5,00 extra.

Motor wheel mounting is €15,50 extra.

Depending on the rim type, aluminum or iron, and the type of brake system, pads or drum, a wheel that's bended, can be straightened.
However the old rim will never be 100%, although the result shall be satisfying.

The motto here is "NO CURE, NO PAY".
The stated price is front wheel mounting.
Rear wheel mounting is €5,00 extra.

For this price you will get a new rear wheel for coaster(pedal)-brake with the size 28x1.5/8x1.3/8 (622) accommodated with a aluminium rim.
At a Shimano brake hub the rim is standard RVS and cost €98,00.

The black example from the picture is for the "Old Dutch" (hallelua) with the size 28x1.1/2 (635) and cost €46,50.
MOUNTING INCLUDED for all these prices!

For all other complete wheels; fixed axle, or fall-out-hubs with quick release for 28" or 26" (mountain bikes), with freewheel or cassette sprockets, prices are on request.

Not all wheels are completely new deliverable or very expensive.
Renew your existing hub with new spokes into a new rim we also perform.
The stated price is for a common, standard 28"-622 chrome or aluminum rim.
ASSEMBLY INCLUDED for all these prices!

The ZAC19, as shown, will be replaced for €58,50.

Front wheel mounting is €10,00 DISCOUNT!

KMC is the standard brand we use for chains. The price/quality ratio is simply the best.
Standard chain KMC Z510 (1/8") or Z610 (3/32") used on coaster brakes and most hub gears, is also mounted for this price.
Cleaning sprockets, covers and/or derailleur is €5,00 extra!

The most universal, 2 part, chain cover is deliverable in several colors.

The well known 3-part covers (EXCELLE) are also deliverable but cost €25,50
Chain guards are on request but often not obtainable for older models.
When a new mounting bracket has to be place on the bottom bracket, additional €15,00 are charged.

The most universal, for a 28" wheel equiped bike, is the black one.
Models for sports bicycles with derailleurs (transparent) and mountain bikes are only at quotation.
When a new mounting bracket has to be place on the bottom bracket, additional €15,00 are charged.

Locks are available many variations.
A ring-lock is mounted to the bicycle frame to prevent the removal of the rear wheel.
With a chain-lock one can connect the bike to a fixed point.
AXA has a combination of those two.
The shown ring-lock is an example and cost €15,00.

Of the three items shown the price belongs to the cable adjuster (left) en the anchor (middle) for Sturmey Archer.

The click-anchor of SRAM/Spectro (right) cost €3,50.

For both Sturmey Archer as Torpedo/SRAM 3-gear hubs these parts are available.

For a number of other systems the prices differ and due to the variety only on order.

Adjusters and cable anchors are not included in the price for replacing a clable(set).

Shimano 11 tooth wheels cost 26,50.

The price includes the cleaning of the derailleur; definitely needed in most cases.

The brake pads for this price are from Union-72mm. For V-breaks like the picture, for Cantilever equal without inbus.

Other models or quality are obtainable at additional cost.

The standard brake lever is from Saccon; Comfort Universal

Other models or brand are obtainable at additional cost.

The three most used parts that can be lost when your brake cable breaks.

Other models, if possible, are obtainable at additional cost.

Here it might be possible to add a separate chapter due to the amount of models and verieties.

Besides the shown model, more are deliverable.

Depending on the model and brand, these are obtainable at additional cost.

Chainwheel is an other name for this. The one in the picture is from VINTY with 44 teeth.

The more modern bicycle has 38 teeth, with 170mm disk, on the front-side; and come at a different price.

The shown bottom bracket is from SUNRACE. this is called the BSA68 type and is made of steel met fixed bearings and a square axle.
Aluminum and Shimano models are deliverable but are more expensive.

Due to the extensive variety we can't have everything in stock but can be supplied on 48hrs basis.

Gazelle press-in with chaincover connections (wings) cost €42,00

Only black and silver-gray are in stock.

Most other brands, colors and sizes are obtainable.

Everything, except a number of the standard colors, blue, green, brown, at additional cost.

This is the most used synthetic set; width 42mm.

Only one model in stock.
Other models can be ordered and obtainable in several colors at extra cost.

Also several synthetic models obtainable for mountain bikes from €11,00.

The standard support is like the picture; in several colors with mounting on the wheel axle.

Models with a 'bumper', special colors or mounting outside the wheel axle at additional cost.

The shown model is the "Selle Royal 6261" bicycle seat we have in stock as standard.

All other brands and models are obtainable at additional cost.

Children seats from €9,00

The shown stand is from Spanninga model Easystand and cost €13,00. Both for a wide (30mm) as well a small (20mm) top.

Other brands and sizes are available at different price.

Also for mountain bikes with frame mounting, several models are obtainable!

The shown models are both LED battery driven lights.

In principle most types are obtainable on request.

In stock we have the standard lights for dynamo and LED driven types.

The stated price is for a general, black fork type.

What will be checked:

Adjust brakes and chain, unless intensive wear, is inclusive.

The work we can do on electrical bicycles is similar to regular bicycles.
Sometimes the drive wheel in the front, the motor's gearbox has an issue due to plactic construction. If the motor is a Sanyo as used in e.g. Sparta,this gearbox can be replaced at a price of €165,00

Check if all parts are present and if neccessary complain and the webshop.
Assemble to a rideable bicycle.
All extras like carrier front, childrens seats come with an additional price. Hourly rate is €22,50/'hr.

When you have no problem with it, have the box delivered at our address to assemble.